CONFIGURATOR – TELESCOPIC FORK SINGLE DEEP

Similar to illustration

This field is hidden when viewing the form
KUNDENDATEN
Customer Data
Please insert your contact details
Company*
Project*
Contact person*
E-Mail*
Phone*
Street, No.*
Postal code*
Place*
Country*
This field is hidden when viewing the form
TECHNISCHE DATEN
Technical Data
Please provide further details
Place of use*
Bundesstaat
Number of units*
Desired delivery date*
DD slash MM slash YYYY
Pease choose the most appropriate statement:*
- Your configuration is the basis for project planning. You need technical data for your application.
- Your projected load handling device corresponds to an approvable design. No specific adaptations are necessary.
Note: Configuration is subject to technical changes by DAMBACH COMPONENTS
This field is hidden when viewing the form
WELCHES PRODUKT
Please select the product you want to configure
Welches Produkt*
- Telescopic Fork consisting of 2 tines with 1 motor
- Telescopic tine with 1 motor
If you would like to configure a telescopic tine please get in touch with us.
Please clickHERE
Please specify the payload (in kg)*
m_Max ≤ 1500 kg
please choose the version that applies to your local situation
- Load carrier lengthwise
- Load carrier crosswise
This field is hidden when viewing the form
Längs
What types of load carriers do you use (Multiple choices possible)
- Euro-Palett (DIN 13698/1) with
  z1=1200 mm; x1=800 mm; y1=144 mm
- Industrial-Palett with
  z1=1200 mm; x1=1000 mm; y1=156 mm
- Example Industrial-Pallet
  z1=1200mm; x1=1200 mm; y1=147 mm
- Chep B1210A with
  z1=1200mm; x1=1000 mm; y1=162 mm
- Mesh Box (DIN 15155) with
  z1=1240 mm; x1=835 mm, y1=970 mm
- Chep plastic Euro-Pallet without detent edges
  z1=1200 mm; x1=800 mm; y1=160 mm
- Chep plastic Euro-Pallet with detent edges
  z1=1200 mm; x1=800 mm; y1=160 mm
- Industrial Pallet (DIN 13698/2)
  z1=1000mm; x1=1200 mm; y1=144 mm
- Chep Industrial-Pallet B4840A with
  z1=48"; x1=40"; y1=141 mm
- GMA Pallet
  z1=48"; x1=40"; y1=120 mm
- CABKA plastic-Pallet
  z1=1200 mm; x1=800 mm; y1=140 mm
- US Pallet Stringer
  z1=48"; x1=40"; y1=143 mm
- CP 1
  z1=1200 mm; x1=1000 mm; y1=138 mm
- CP 2
  z1=1200 mm; x1=800 mm; y1=138 mm
- CP 3
  z1=1140 mm; x1=1140 mm; y1=138 mm
- CP 4
  z1=1100 mm; x1=1300 mm; y1=138 mm
- CP 5
  z1=1140 mm; x1=760 mm; y1=138 mm
- CP 9
  z1=1140 mm; x1=1140 mm; y1=156 mm
- 9 Block
  z1=1219 mm; x1=1016 mm; y1=141 mm
- Version S: Customer-specific
Do you have a customer-specific load carrier?
Please specify the measurements of this kind:
This field is hidden when viewing the form
Hilfsfeld unterfahren auswahl
This field is hidden when viewing the form
Breite b2 [in mm]
This field is hidden when viewing the form
Höhe h2 [in mm]
This field is hidden when viewing the form
Hilfsfeld ZA unterfahren
This field is hidden when viewing the form
Hilfsfeld eingefahren auswahl
This field is hidden when viewing the form
Breite b1 [in mm]
This field is hidden when viewing the form
Höhe h1 [in mm]
This field is hidden when viewing the form
Hilfsfeld ZA eingefahren
This field is hidden when viewing the form
Zinkenabstand (ZA)
Is there a supernatant above the load carrier?*
- Yes
- No
Überstand
Length z2 [in mm]
This field is hidden when viewing the form
z1 Hilfsfeld
Length x2 [in mm]
This field is hidden when viewing the form
x1 Hilfsfeld
This field is hidden when viewing the form
Quer
What types of load carriers do you use (Multiple choices possible)
- Euro-Palett (DIN 13698/1) with
  x1=800 mm; z1=1200 mm; y1=144 mm
- Industrial-Palett with
  x1=1000 mm; z1=1200 mm; y1=156 mm
- Example Industrial-Pallet
  z1=1200 mm; x1=1200 mm; y1=147 mm
- Düsseldorfer-Pallet with
  x1=600 mm; z1=800 mm; y1=163 mm
- Chep B1210A with
  x1=1000 mm; z1=1200 mm; y1=162 mm
- Mesh Box (DIN 15155) with
  x1=835 mm; z1=1240 mm, y1=970 mm
- Chep plastic Euro-Pallet without detent edges
  x1=800 mm; z1=1200 mm; y1=160 mm
- Chep plastic Euro-Pallet with detent edges
  x1=800 mm; z1=1200 mm; y1=160 mm
- Chep Half pallet B0806A with
  x1=600 mm; z1=800 mm; y1=163 mm
- Chep Industrial-Pallet B4840A with
  x1=40"; z1=48"; y1=141 mm
- CABKA plastic-Pallet
  x1=800 mm; z1=1200 mm; y1=140 mm
- US Pallet Stringer
  x1=40"; z1=48"; y1=5.63" mm
- CP 1
  x1=1000 mm; z1=1200 mm; y1=138 mm
- CP 2
  x1=800 mm; z1=1200 mm; y1=138 mm
- CP 3
  x1=1140 mm; z1=1140 mm; y1=138 mm
- CP 4
  x1=1300 mm; z1=1100 mm; y1=138 mm
- CP 5
  x1=760 mm; z1=1140 mm; y1=138 mm
- CP 6
  x1=1000 mm; z1=1200 mm; y1 =156 mm
- CP 7
  x1=1100 mm; z1=1300 mm; y1=156 mm
- CP 9
  x1=1140 mm; z1=1140 mm; y1=156 mm
- Industrial-pallet (DIN 13698/2)
  z1=1000 mm; x1=1200 mm; y1=144 mm
- 9 Block
  x1=1016mm; z1=1219 mm; y1=141 mm
- Version S: Customer-specific
Do you have a customer-specific load carrier?
Please specify the measurements of this kind:
This field is hidden when viewing the form
Hilfsfeld Quer unterfahren auswahl
This field is hidden when viewing the form
Breite b2 [in mm]
This field is hidden when viewing the form
Höhe h2 [in mm]
This field is hidden when viewing the form
Hilfsfeld ZA unterfahren Quer
This field is hidden when viewing the form
Hilfsfeld eingefahren Quer auswahl
This field is hidden when viewing the form
Breite b1 [in mm]
This field is hidden when viewing the form
Höhe h1 [in mm]
This field is hidden when viewing the form
Hilfsfeld ZA eingefahren Quer
This field is hidden when viewing the form
Zinkenabstand (ZA)
Is there a supernatant above the load carrier?*
- Yes
- No
Überstand
Length z2 [in mm]
This field is hidden when viewing the form
z1 Hilfsfeld
Length x2 [in mm]
This field is hidden when viewing the form
x1 Hilfsfeld
This field is hidden when viewing the form
Technische Details
Do your loads consist of homogenous piece goods?*
- Yes
- No
Please describe your piece goods
Additional technical details
Please describe your mechanical interface. Please choose the most appropriate interface for your requirement:*
The “Beam” designates the mechanical interface f.e. to a lifting carriage
- Version 1:
  1-Beam asymmetrical
- Version 2:
  1-Beam symmetrical
- Version 3:
  2-Beam asymmetrical
- Version 4:
  2-Beam symmetrical
- Version S:
  Customer-specific
Your mechanical interface is not displayed?
Please describe your situation:
How shall the drive be mounted?
Location of the drive*
- Version 1
- Version 2
- Version 3
- Version 4
- Version S:
  Customer-specific
Your drive position is not displayed?
Please describe your situation:
Please configure the installation space gap z6 in your system*

Maximum distance z6 [in mm]
Please choose the desired profile version

Note: When retracting the telescopic tines into the pallet, a tine clearance is required all around. Recommended tine clearances xl = 22 mm / yl = 15 mm. If pallets with different clearances are used, the remaining clearances must be observed.
profile version*
- Version S
- Version TSX
- Version M
- Version TMX
Please choose the desired profile version

Note: When retracting the telescopic tines into the pallet, a tine clearance is required all around. Recommended tine clearances xl = 22 mm / yl = 15 mm. If pallets with different clearances are used, the remaining clearances must be observed.
profile version*
- Version S
- Version TSX
- Version M
- Version TMX
This field is hidden when viewing the form
z MAX Hilfsfeld für Unterteil
Installation space [in mm]
This field is hidden when viewing the form
Length bottom part [in mm]
Length top part [in mm]
Extension path single deep [in mm]
Extension path single deep [in mm]
This field is hidden when viewing the form
Ausfahrweg einfachtief max
Do you require an additional single deep extension path?*
- Yes
- No
How long is the maximum single deep extension path? [in mm]*
(Subject to a technical feasability study)
Please choose the mounting plate to your mechanical interface*
- Type 1
- Type 2
- Type S: Customer-specific
Your mounting plate is not displayed?
Please describe your situation
Please choose your desired surface coating for the top part of the telescopic fork
The standard colour of the telescopic forks‘ top part is RAL 9005.
Please specify your desired colour
This field is hidden when viewing the form
Nutzungsdauer und Rahmenbedingungen
Operating life and environmental conditions
How many operating cycles per hour are assumed?
Please state a number ≤ 600
How many operating hours per day are assumed?
Please state a number ≤ 24
How many operating days per year are assumed?
Please state a number ≤ 365
Please specify the ambient temperature [in °C] *

Please state a temperature between -30°C and +40°C
Min. Temperature [in °C]*
Max. Temperature [in °C]*
Please specify the ambient humidity [in %]*
Please state an ambient humidity between 15% and 60%
Are there any special environmental conditions?
- Yes
- No
Please specify the environmental conditions
Is a special corrosion protection required?
- Yes
- No
Please specify the required corrosion protection
Do special lubricants specifications exist?
- Yes
- No
Please specify the lubricants required
Are there any special factory regulations?
- Yes
- No
Please specify the existing factory regulations
This field is hidden when viewing the form
Antriebseinheit
Drive unit
Please configure the drive*
- Standard Version
- Performance Version
- Customer-specific version
Please specify your desired drive unit:
Note: Your individual drive unit requirement will be checked as soon as possible. The DAMBACH COMPONENTS team will contact you.
We recommend the following drive unit
Information about the drives‘ performance
Acceleration (unloaded): a_unloaded = 1,5 m/s²
Acceleration (loaded): a_loaded= 1 m/s²
Velocity (unloaded): v_unloaded = 1,25 m/s
Velocity (loaded): v_loaded = 0,85 m/s
Information about the drives‘ performance
Acceleration (unloaded): a_unloaded = 5 m/s²
Acceleration (loaded): a_loaded = 1,3 m/s²
Velocity (unloaded): v_unloaded = 2 m/s
Velocity (loaded): v_loaded = 1,5 m/s
Information about the drives‘ performance
Acceleration (unloaded): a_unloaded = 1,5 m/s²
Acceleration (loaded): a_loaded = 1 m/s²
Velocity (unloaded): v_unloaded = 1,25 m/s
Velocity (loaded): v_loaded = 0,85 m/s
This field is hidden when viewing the form
Weitere Details
Please configure your torque limitation*
Your travel encoder is:
- Motor encoder
Your travel encoder is:
- External encoder
Is a mounting device for the travel encoder required?*
- Yes
- No
Please specify the required travel encoder*
Shall the required travel encoder be part of DAMBACH COMPONENTS’s scope of supply?*
- Yes
- No
Equipment
Please configure your additional equipment
Please configure your center position sensor*
Comments section
Data upload
Drop files here or

Accepted file types: pdf, dwg, dxf, jpeg, png, gif, mp4, mpg, avi, mov, step, jpg, xlsx, xlsm, xls, txt, doc, docx, docm, Max. file size: 8 MB.
The contact to our customers is important to us**
- Yes, I agree to the DAMBACH COMPONENTS privacy policy.
This field is hidden when viewing the form
Hilfsfelder
This field is hidden when viewing the form
b1
This field is hidden when viewing the form
b1_min
This field is hidden when viewing the form
b1_max
This field is hidden when viewing the form
h1_min
This field is hidden when viewing the form
h1_max
This field is hidden when viewing the form
b2_min
This field is hidden when viewing the form
b2_max
This field is hidden when viewing the form
h2_min
This field is hidden when viewing the form
h2_max
This field is hidden when viewing the form
za1_min
This field is hidden when viewing the form
za2_min
This field is hidden when viewing the form
za1_max
This field is hidden when viewing the form
za2_max
This field is hidden when viewing the form
Durchbiegung des ausgewählten Produkts: Beladener Zustand
This field is hidden when viewing the form
Durchbiegung des ausgewählten Produkts: unbeladener Zustand
This field is hidden when viewing the form
Eigengewicht de ausgewählten Produkts (ohne Antrieb)
This field is hidden when viewing the form
Eigengewicht des Antriebs
This field is hidden when viewing the form
Eigengewicht des ausgewählten Produkts (mit Antrieb)
This field is hidden when viewing the form
html_table
This field is hidden when viewing the form
configuration_token
This field is hidden when viewing the form
configuration_link
This field is hidden when viewing the form
configuration_qrcode